Gland Packing Index

AESTEX Joint Sealant

100% pure e-PTFE (according to VDE-VDI 2480) in a stretched filament knotted fibre structure. This ensures high-pressure resistance (no cold flow) and a good adaptation to the flange surface.

API Low Emission Packing Set 4337

Reinforced with a proprietary inconel wire matrix and impregnated with a high Sealability Compound and a Passive Corrosion Inhibitor

AquaStar

Replacement for machined lantern rings, which has excellent chemical and thermal resistance

Die Formed Packing

Custom made ring sets for pumps, agitators, valves and reciprocating equipment. Die formed and pre-cut rings are today’s user-friendly solution and at the same time provide the best seal result without product waste.

DVS Sealing Compound System

Seals stuffing boxes for nearly all applications with excellent performance. Ideal for worn shaft sleeves & Non centric running shafts.

EnviroStar 200

Ring set made of pure PTFE packing fulfills with a tested leakage

EnviroStar 200BR

Ring set made of pure PTFE packing and PTFE compound bull rings fulfills with a tested leakage

EnviroStar 300

Ring Set made from special high temperature resistant yarn

EnviroStar 400

Packingset made by combining two expanded Graphite grades and designs in order to avoid blow out and extrusion

LiveStar

The LiveStar 'Live loading system'. Screws on top of the bolt in a kind of cup form and giving thereby plenty of extra length to accommodate the uncompressed disc spring stack.

SootStar

For soot blower applications with steam temperature up to max 400 °C. The construction uses in multiple layers extrusion resistant and wiper rings in combination with special rings.

Style 210

Excellent in highly abrasive products, Wear resistant universal packing.

Style 250TP AraStar

Volume stable, pressure stable, High cross section density through PTFE blocking agent, which protects against penetration of crystallizing media.

Style 260

High cross-section density and compactness, Elastic and flexible.

Style 266TP

Highest practical standardisation possibilities. Equal reduced wear through special running-track reinforcement.

Style 270 - 274

Very form stable, Recommended shaft surface hardness HRC 50

Style 275TP SlurryStar

Reinforced packing with reduced wear through improved heat conductivity, Recommended shaft surface hardness: HRC 50

Style 285TP PaperStar

'Clean packing’ required in applications where safety against contamination is required.

Style 290

High durability and flexibility, Excellent chemical resistance (e.g. hydrofluoric acid 15%/50°C).

Style 299

Characteristics, High fatigue strength and flexibility and Good acid resistance

Style 310

High temperature blocking agent increases the cross section density and acts as a form stable pressure bed for the Carbographite fiber

Style 325

Volume stable, pressure stable packing, High Cross section density due to special impregnation

Style 330

Strong against abrasive mediums, yet low friction on shaft surface. Recommended shaft/sleeve hardness HRC 45.

Style 333

Self lubricating excellent use in pumps, minimizing the need of Flushwater

Style 337

High cross section density and sealability to minimize emissions

Style 340

Universal plant wide use in static applications

Style 343

Universal plant wide use in static applications

Style 350

Superb emergency running capability, no wear on the shaft, excellent thermal conductivity

Style 351

Wear and extrusion stability through Carbon fiber reinforcement, self lubricating, excellent use in pumps, minimizing the need for flushwater

Style 355

Highest quality pure graphite gives a coefficient of expansion similar to steel

Style 366TP

Non-hardening, good reset capability, coefficient of thermal expansion like steel.

Style 375

The addition of high temperature Graphite impregnation increases the cross section density and works as a stable pressure cushion for the graphite fibre

Style 380TP

Self lubricating fibre with high carbon content and excellent heat transfer

Style 550 - 560

Protected against wear with abrasive media. Cross-section density and structural stability, yet elastic and pliable.

Style 720

Pliable, easy to compress packing. Minimum surface hardness (HRC 25*).

Style 725SI

Highest chemical resistance for a packing in rotating equipment

Style 728TP PaperStar HS

Clean packing with ultimate heat conductivity for abrasive products in pumps and other rotating equipment.

Style 730

For high pressure applications and vacuum respectively, die-formed rings are recommended

Style 735OX

In applications with high pressure or vacuum, die formed bullrings of S4

Style 745TP UniStar

Wear resistant through Running Track Reinforcement. Very high heat conductivity through employment of a special heat conductive Compound

Style 760

Very stable shape, little wear, Good heat conductivity.

Style 770TP PulpStar

High cross-section density and structural consistency, elasticity and adaptability. Excellent in acidic, alkaline and hardening and crystallising fluids.