Featured Case Studies
The case studies below showcase the very best of commitment to excellence at AESSEAL across our three core pillars:
- Exceptional Customer Service – putting customers first, every time.
- Advanced Technology – delivering innovation that drives results.
- Sustainable Solutions – engineering a better future for people and our planet.
Staying cool in Cardiff
The cooling system in a High Profile office building in the Cardiff Bay area was operating with just a single duty pump and no standby.
Company makes huge savings with AESSEAL system
A water company in the Middle East has saved almost a quarter of a million dollars following the installation of an AESSEAL bearing protector.
AESSEAL helps UK firm to multi-million pound savings
A leading UK company is set to save more than £5 million over five years following the installation of AESSEAL LabTecta OP bearing protectors.
Rapid response impresses Saudi customer
Sourced and supplied a replacement seal in just two weeks for customer’s Oil and Gas operation in Saudi Arabi
Chemical plant saved over €500,000 in the first year
A critical glue agitator vessel was affecting productivity for a silicone manufacturing facility in France. This situation was costing the company thousands of Euros in lost production.
Warman conversion the answer for Spanish company
A seal conversion kit for the Warman® AH Range of Ultra Heavy Duty Slurry Pumps helped to solve a variety of problems being experienced by a Spanish aluminium producer.
DMSF makes its mark in Japanese paper industry
The installation of an AESSEAL® DMSF™ seal at a Japanese paper plant has increased the MTBF from just six months to seven years.
Rapid response saves the day for UK company
The rapid repair of a faulty seal saved a UK pharmaceuticals company almost £2 million in lost production.
Seal upgrades save over US $3.4million in seven years
A company in the Oil and Gas industry in Qatar were dissatisfied with the reliability of the mechanical seal used in crude export and oil/water booster pumps.
DMSF seal the answer at South African plant
The installation of the AESSEAL DMSF seal and SW2 water management system at the Ford plant in Pretoria, South Africa, has improved the MTBF of a crucial seal from less than two weeks to more than two years.
Prompt delivery saves three-month delay
A 12-week delay on the commissioning of a new oil and gas plant in Kuwait was avoided when AESSEAL was able to step in to replace a defective competitor’s seal at short notice.
AESSEAL upgrade removes safety risk
A sealant being used on an Sulzer APP3 pump by a Spanish biofuel company was leaking each time the pump was stopped.
DMSF seals end contamination problem for Spanish firm
A metalworking company in northern Spain had equipped its pumps with component mechanical seals, parallel spring-mounted back-to-back, with an API Plan 54 circulation system.
FIDC ends costly leaks at US firm
The installation of an FIDC seal to replace single seals with no flush or API Plan has dramatically improved pump reliability at a pulp and paper company in New England.
AVT sensors save thousands for US company
Excessive vibrations in a vertical pump in a slurry pit application was leading to failure every month for the North Carolina company Befesa
Dangerous oil leak problem solved by LabTecta FS
A silicon lip seal fitted to a rubber lumps reactor at a chemical plant in northern Spain failed after just ten days, resulting in the serious leakage of oil from the gearbox.
Annual savings of over $2.6 million
A food and beverage customer was experiencing high leakage and contamination in their process fluid on the single pass flow through system they were operating.
AES-Elast the answer to seal selection problem
Employees at William Grant’s Scottish whisky distillery in Girvan, Ayshire, were having difficulty selecting the correct mechanical seals for specific applications.
Upgrade will result in major savings for US company
A US petrochemical company is set to save tens of thousands of dollars a year following the installation of specially-designed seal pots to replace 40 existing pots which had been in place for around half a century.
Improved reliability for new process
A refinery in Canada were commissioning a new lipids coprocessing initiative where renewable feedstock is injected into the cracker.
Standard of service makes AESSEAL a clear winner
The seal on a pump at a chemical plant in the east of England was burning out on average every two weeks due to dry running, resulting in some four hours of downtime each time it failed.
AESSEAL product stops hot oil pump leakage
A large oil and gas company in north Africa contacted AESSEAL to look at a sealing issue on its hot oil pumps.
Major savings follow installation of AESSEAL product
A petrochemical company based in the Middle East was having problems with persistent and costly seal failures.
Major savings with CKD double seal
The single seals being used by Swedish water treatment company were unsuitable for the job they were being asked to do, allowing limescale to enter between the seal faces and leak out on to the floor of the plant.
Full steam ahead for refinery after change to STS seals
An oil and gas refinery in northern England was experiencing poor reliability of its steam turbine.
Chemical Producer Saves Over £1.7 Million in Plant Downtime
A specialty chemical company at its UK processing facility were desperately trying to get spare parts for the mechanical seal on one of its critical reactors.
CDPH & EasyClean boosts MTBF from four months to seven years
The installation of a CDPH double mechanical seal along with an EasyClean™ seal support system proved to be the remedy for the frequent failures of a competitor’s seal at a power plant in Denmark.
Navy reduces repair times and improves pump reliability
When a seal failed, divers had to fit blanks to the pump inlets below the waterline before it was possible to carry out a repair.
AESSEAL system fixes sewage problems for US township
A municipality in Pennsylvania was having issues with major inefficiencies in its sewage treatment system.
Leakage problem solved with STS
A global energy company was facing significant losses as a result of damage to the steam turbine housing at one of its ethylene plants.
Fantastic seal life for notoriously difficult application
A pulp & paper company in the Canada were dissatisfied with the reliability of the mechanical seal used in its Chlorine Dioxide generator pump.
AESSEAL help a Polyethylene plant save €144,000 in 30 months
Replacing labyrinth seals with MagTecta on 8 lobe blowers increases MTBF to over 400%.
DMSC saves Nestlé Purina £182k in just 10 months
Significant savings with mechanical seal and bearing protection for the pet food manufacturer
Reliability Improved For Waste Energy Company
Enfinium were disappointed with the support provided by their pump OEM
Major savings for Algerian food producer
A food production plant in Algeria is saving an estimated $225,000 a year following the installation of an AESSEAL LabTecta OP bearing protector.
Mechanical seals runs an incredible 17 years without problems
Tongaat Hullett Sugar were un happy with the amount of maintenance required on the sealing of one of its pumps.
AESSEAL product brings big savings for South African company
The installation of an AESSEAL FGDSS-N single slurry seal is saving a South African mining company thousands of dollars a year in repair and maintenance costs.
Exceptional service saves thousands in lost revenue
AESSEAL were contacted by a power plant in the UK who were experiencing a major issue with their supply of mechanical seals.
LabTecta ends dust pollution problem for SA firm
Preventing dust from escaping into the working environment and is saving thousands of dollars a year
